All technical data of circular saws are tied to only one parameter - the diameter of the saw blade. The larger it is, the higher the engine power required, as well as the complexity of manufacturing and the weight of the tool. When compiling a rating of the best models, we divided the tools by cutting depth, which depends on the size of the disc. In addition to the characteristics, reviews of customers who have already purchased and rated the tool will always help you make a choice. In the rating, we have collected the best models that received the most positive votes from real customers. Thanks to it, you can understand how to choose a circular saw.
When asked “How to choose the right circular saw for wood?” You should study the assortment and give preference to household tools. In terms of engine power and workpieces of small thickness, saws with cuts from 0.4 to 0.49 cm cope best. This is an ideal option due to its simplicity, low energy consumption, unpretentiousness and low price. For short or occasional jobs this is the best choice.
| Models/Specs | Insсh RKS 40 | BISON ZPD 900 |
| Power, kW | 0,85 | 0,9 |
| Number of revolutions, rpm | 5320 | 4520 |
| Speed regulation | absent | absent |
| Disc size (diameter), cm | 13 | 14 |
| Bore diameter, cm | 0,16 | 0,2 |
| Maximum depth of cut at an angle of 90 degrees, cm | 4 | 4,5 |
| Maximum depth of cut at an angle of 45 degrees, cm | 2,6 | 2,8 |
| Soft start function | absent | Absent |
| Ability to work with guide bar | There is | absent |
| Maintaining constant speed under load | absent | absent |
| Weight, kg | 2,7 | 3 |
Saw Bosch PKS 40 (circular)
What to look for to choose the right circular saw? Even in a relatively small device, as in this model, a motor with good power will help cope with all tasks and reduce the likelihood of the wheel jamming during the work process. Use only 18.5*1.58 cm discs + 3 cm adapter.
Advantages:
- The device is equipped with a hypoid gear that supplies force to the shaft. The engine is located along the cutting line, so much less effort is required when working with this saw.
- One of the few models that allows you to hold the instrument with one hand.
- Ergonomic and reliable – the saw fits well in the hand and glides across the surface.
- The power allows for good processing of many materials.
- Excellent visibility of the workplace - it is convenient to observe the cutting line while working.
Flaws:
- Lack of smooth start - when stratified, the device may “jerk” in the hands in the wrong direction.
- Weight is a drawback for long-term work, but a clear plus in terms of the “feeling” of the saw in your hand.
- The kit does not include a stop for making longitudinal cuts - this can be corrected with a Svenson square.
- When working on a roof, you will feel the lack of fasteners with which you could hang the saw on the beams during breaks.
- A “gentle” clamp that sets the depth of the cut - sometimes people complain about the fragility of this part.
Many buyers of this circular saw are engaged in roofing work, or bought a saw for building a house. It is not needed for use in household work - the price and power are too high for simple repair work.
The 21*3 cm cutting blade creates cuts with a depth of 7.55 and 5.7 cm, even at an inclination of 56 degrees. Confidence in the tool is added by the engine power of 1.8 kW, which accelerates the disc to 5200 rpm.
Advantages:
- It does not have the highest weight for a saw with such characteristics - only 5.11 kg.
- When working, you will feel the power of the engine - the saw will run smoothly, without jerking.
- Weight distribution and ergonomics are at the level - if necessary, you can operate the saw with one hand.
- The cut is smooth and clean on all materials of the correct thickness.
- The handles have rubber pads, which makes it possible to confidently hold the tool in your hand.
