How to clean earwax from headphones at home. How to clean vacuum headphones

Headphones tend to get clogged with earwax, which makes hearing worse. It's also unpleasant. Who would like to use dirty accessories for an iPhone or other model?

Of course, no one likes this. Therefore, you need to learn how to clean them quickly and, most importantly, correctly, so that the headphones do not stop working at all.

Fast

If you have a great desire to clean the accessory, but great fear damage anything, this method will certainly work.

How to clean headphones quickly and without disassembling:

Buy hydrogen peroxide and cotton swabs at the pharmacy.
Soak the sticks in the peroxide solution and wipe the head. Remove all earwax. If the toothpick is too thick and doesn't reach where it needs to go, use a toothpick.
Then take a disc or clean lint-free cloth and wipe the earphone completely with peroxide. You can also wipe the wires, this will disinfect them.

There is another way to use hydrogen peroxide, but it takes longer and is also more effective.

How to clean your device from earwax at home correctly:

Take a plastic bottle cap and a paper clip. Heat the latter and make small indentations in the lid on both sides. This is necessary for the stability of the device; the cable will rest on it. The recess will prevent the headphones from turning over. This is important, because the solution can get on the speakers.
Next, place a partition in the middle. Make it out of plastic because the paper will get wet. The partition is necessary for convenient fixation of the device inside the lid. It eliminates vibrations.
Fill the lid with hydrogen peroxide diluted halfway with alcohol. Insert the headphones and leave to soak for an hour.
Clean the mesh with a toothbrush or cotton swab.
Then take a clothespin and place a device in the center of each one. Leave it to dry like this. You can simply put them on paper or cotton wool.

That's the whole cleaning method. Peroxide is a disinfectant and also a cleaning agent. You can use it daily.

If you don’t know how to bleach your device, also use hydrogen peroxide. Clean the entire cable with it.

If the silicone inserts are already so dirty that it is impossible to remove earwax and they have lost attractive appearance, just throw them away and replace them.Such attachments are sold in telephone stores, and the cost is very reasonable.

Medical alcohol

Alcohol is used similarly to hydrogen peroxide. It also removes all bacteria.

For cleaning, use cotton swabs and toothpicks.

This manipulation will update appearance accessory will make them clean. The whole process takes no more than 10 minutes and does not harm the device.

Vacuum cleaner

It will help remove dirt, dust and remaining earwax. This way you can clean both white and colored headphones.

To do this, you need to make your own nozzle so that it fits the size of the headphones. It is recommended to use a ballpoint pen or other thin tube.

The adapter is made of paper, which is fixed with tape or plasticine. The latter is much more convenient.

How to clean earwax from headphones?Removing contamination is not difficult. Simply turn on the vacuum cleaner and suck up the wax for a few seconds.

You can use a vacuum cleaner to dry them after soaking. It removes all particles that have not dissolved in the peroxide.

The method is suitable for earpods and apple vacuum headphones.

Invoices

Such devices first need to be disassembled. Cleaning of overhead accessories is not possible when they are complete.

They are equipped with soft ear pads that cannot get wet.

How to disassemble:

First remove the top foam liner.
Then take a Phillips screwdriver and remove the screws.
Remove all trims.

It is allowed to use the same hydrogen peroxide or medical alcohol as a cleaning agent.

Brush everything gently with a toothbrush. Internal surfaces The embouchure is treated with a cotton pad soaked in alcohol.

Connector

It is equally important to pay attention to the connector in your phone or player where the headphone cable is inserted.It also becomes dirty, making audibility poor. If you don't clean it for a long time, it may fail.

When cleaning the connector, unplug the device. Take a toothpick and wrap some cotton wool around it, soak it in rubbing alcohol, and gently wipe everything inside.

Cleaning your headphones won't take much time. Once you’ve filled your hand, it won’t take more than a few minutes at all (don’t count the time allocated for soaking, because you can do other things around the house.

When cleaning the connectors or the headphones themselves, proceed with extreme caution. Such accessories should not be washed in washing machine, they will fail and you will have to buy a new one.

Sooner or later, any headphones get dirty. From frequent use The mesh located on top of the speaker becomes clogged with dust, earwax and grease stick to it. As a result, the sound becomes worse and the question arises of how to clean the headphones from all these contaminants.

Headphone types

In-ear headphones and “droplets” get dirty the most. Large-format overhead models can simply be wiped from above - they do not face the problem of sound weakening due to sulfur. Unless coffee or juice accidentally spills on them, but then more serious repairs will be needed.

The earbuds are inserted into the ear canal and have vacuum tips. The attachments are simply washed to remove sulfur in soapy water after removing them first.
"Drops" come complete with players, phones, iPhones and other household audio equipment. They have the simplest design, but are not always collapsible.

To properly clean the mesh, it will need to be removed. In liners, the mesh is closed with a nozzle. In this case, first remove the nozzle.

If it is possible to remove the mesh, then use tweezers or a needle, carefully picking it up on one side. If you cannot remove the mesh separately, you will have to wipe it from the outside.

Cleaning: general rules

For cleaning we use alcohol, which helps to get rid of general dirt and at the same time disinfect. You can pour a little alcohol into the lid plastic bottle, from a bottle of medicine or into a miniature glass. Throw the mesh directly into the glass and wait a few minutes for it to soak. If it was not possible to remove it, then carefully dip the earphone so that only its lower part comes into contact with alcohol. You can also gently wipe the surface with a cotton swab dipped in cleaning liquid.

Hydrogen peroxide helps get rid of sulfur. It is used in the next step. Dip the earphone in peroxide to dissolve any remaining wax. You can secure the head with tape and leave for 15-20 minutes. It is not recommended to completely immerse the earphone in liquid, so as not to damage the speaker. Although there are reviews according to which complete immersion in peroxide did not damage the device.

After this procedure, all you have to do is wait until the headphones are dry and you can use them again. To dry, place them on a clean napkin and leave them for several hours.

Quick cleaning

If your headphones cannot be disassembled at all or you are afraid of breaking something during disassembly, proceed as follows:

Take a cotton swab and soak it in hydrogen peroxide.
Clean the head with a stick to remove wax deposits.
Hard-to-reach grooves can be cleaned of wax using a toothpick.
Wipe the earphone completely with a cotton swab soaked in peroxide and wrung out.

This procedure will update the appearance of the headphones, disinfect them and make them clean. It takes no more than 10 minutes and does not cause any harm to the device.

Using a vacuum cleaner

A vacuum cleaner helps speed up drying and at the same time remove remaining wax. It is necessary to make a special small nozzle. To do this, use a rolled-up ballpoint pen or other thin tube. The adapter from the vacuum cleaner tube is made of plasticine. Next, turn on the vacuum cleaner for 3 seconds and suck up the remaining pieces of sulfur, other undissolved particles of dirt and drops of water.

What not to do

Sometimes there are tips to wash the headphones or wash them in water using a toothbrush. This method is questionable, since any electrical device It is forbidden to wet the inside. Of course, there is a chance that the dirt will get wet and nothing will happen to the device, but the risk is very high. After washing, the headphones may stop working completely, and they cannot be repaired.

It is worth disassembling the headphones yourself if you are sure that you can assemble them. Perhaps you don't mind throwing them away. In this case, you can take a risk. First, clean the outside “droplets” in any way you like. In the absence positive result disassemble and clean the inside.

The cause of poor sound or its complete absence is often broken or torn wires. In this case, no amount of cleaning will help. You either need to solder them or replace them with new ones.

It has long been known that headphones are one of the best carriers of health-threatening diseases. They harbor ear fungus, as well as staphylococci, streptococci and influenza. Headphones live in unknown pockets, so they quickly lose their appearance. The same EarPods turn first into gray and then into yellow.

But I have a solution. For myself, I have long chosen 5 cheap items that can be bought at the pharmacy. They will help wash any type of headphones from both microorganisms and common dirt.

Ear sticks

For some reason, many sites on the Internet write that sulfur and other relatively large debris from hard-to-reach areas of the headphones should be removed using toothpicks. I think this is complete nonsense. Using a toothpick can damage the membrane and other parts of the headphones, so I recommend either being as careful as possible when doing this, or giving preference to ear sticks.

Ear sticks are even quite suitable for removing wax from the inside of EarPods or AirPods where the protective mesh is located. And their soft “tips” will help avoid damage.

Ear sticks are suitable for any hard-to-reach and internal parts earbuds, in-ear and on-ear headphones. If the dirt is old and dried, you need to moisten them in one of the solutions that I will talk about later.

Cotton pads

Cotton pads are useful for removing dirt from the outer parts of any headphones or wiping them dry after use. liquid products from the pharmacy.

Cotton pads are great for cleaning headphone wires. For example, if your EarPods are not yet yellow, but are already gray, you can simply wet a cotton pad with water, squeeze it out as much as possible, and wipe all their outer parts. This might help.

Cotton pads are also good for cleaning the ear pads of large over-ear headphones. Depending on the type of contamination, you can do this either simply slightly damp or soaked in one of the pharmaceutical liquids.

After any, let’s say, wet procedure with cotton pads, it is important to wipe the headphones dry.

Hydrogen peroxide

My experience shows that hydrogen peroxide does a good job of removing all contaminants ingrained into the body. For internal parts there are other more effective means, but on the outside (wires, arms, body) I only use peroxide.

If the headphones are white and have already turned not even gray, but yellow, I moisten them with peroxide using cotton pads and leave them wet for 10-20 minutes. After that, I wipe them first with a slightly damp and then with a dry cotton pad. In most cases this is more than enough.

It's even easier with black ones. In principle, dirt is practically invisible on them, and after peroxide they will even shine.

Formic alcohol

Formic alcohol can also be used for external use, but it is more caustic (as explained to me knowledgeable people) than peroxide, so I don't risk doing this. If the headphones are not of very high quality, you can simply damage them and ruin the entire appearance.

But it’s great for internal parts if you can’t just wipe off the dirt with a dry ear stick. For example, in AirPods and EarPods I usually wipe the mesh this way if too much sulfur has accumulated in it and it’s already like a stone.

You can also use formic alcohol to make baths for in-ear headphones. Remove the nozzles from them, pour just a little alcohol (1 mm in height) into the soda caps and attach them with clothespins so that the inner mesh is in alcohol. So they should soak for about 5 minutes.

After all these procedures, I do not wipe the headphones dry; this is not necessary.

Chlorhexidine

Chlorhexidine is mine latest find, which was recently recommended to me by friends who sell hearing aids.

They recommend that their clients regularly wipe these devices with it. There are no components that can damage the headphones, but antimicrobial actions simply excellent: it will kill staphylococci, streptococci and other rubbish.

Along with it, I use ear sticks and cotton pads. First for internal use, and the second for external. Everything is fine and I’m not afraid to give headphones to friends who have their own illnesses. It’s generally cool to always have such a thing with you - for example, in a car first aid kit.

Guys, I’ve been using almost all of this for a long time and about liquids I tried to communicate with specialists who are in the know. But you still do all this at your own peril and risk, keep that in mind. However, it's better to try cleaning very dirty headphones than to throw them away altogether. What do you use?

This post was written reader V

Prolonged use of headphones leads to contamination. Street and household dust gets clogged into the attachment points, and earwax, which is normal for every person, not only worsens the appearance of the headset, but also spoils the sound quality. So that the headphones serve faithfully for a long time, they must be cleaned every two weeks. Using the tips below, you can learn how to clean your iPhone headphones quickly and without unnecessary problems.

The process of cleaning your favorite headset is simple and interesting. So that it does not take much time, you need to prepare in advance necessary tools and cleansing products. To tidy up headphones from any phone model (iPhone 5, iPhone 6 from Apple and other models), you will need:

small rags;
napkins;
toothbrush;
cotton swabs and discs;
matches or toothpicks;
hydrogen peroxide;
any alcohol (vodka).

Which tool to choose and what tools to use depends on the type of headset. The type of device largely determines how you clean it.

Alcohol or hydrogen peroxide can be replaced with vodka, cotton swabs with a match or toothpick

Cleaning different types of headphones

Each type of headset has its own problems that arise due to contamination. Most susceptible external factors in-channel models. Dirt deposits on the earbuds, accumulation of dust - all this leads to the fact that the device loses its original appearance and stops working correctly. Therefore, you need to know how to clean your headphones from wax and other debris.

Useful: Closed, on-ear devices, as well as wireless headphones, are the least likely to get contaminated. These models do not require careful maintenance. However, dust and dirt can accumulate in the foam pads, which, in turn, negatively affects human health.

In-ear headphones

Before starting work, you need to remove the ear pads from the headphones, and then wipe them with a piece of cloth soaked in peroxide. If there are still dirty places, you should use a toothbrush. True, this must be done very carefully so as not to damage the material.

Next, clean the mesh that blocks the headset channel. If this part is removable, you need to carefully pry it off with a toothpick and place it in a small container filled with alcohol. If you cannot remove the mesh, you can walk over it with a cotton swab dipped in an alcohol solution. But at the same time, you must ensure that liquid does not penetrate inside the channel - this will lead to damage to the headphones. To disinfect the entire body, you also need to wipe it with an alcohol-soaked swab with a cotton tip.

A cotton pad will help for flat models; for vacuum models you will need a cotton swab

On-ear headphones

If the headset is equipped with soft foam inserts, then you should know that such pads cannot be wet. When exposed to moisture, the material loses its shape and becomes damaged. correct passage sound. These parts of the headphones are best cleaned with a vacuum cleaner using the narrowest nozzle. You can use a sticky roller for clothes.

The easiest way to clean pads made of leather or faux leather is with a damp cloth. To clean the velor ear pads, you can use a cloth soaked in alcohol.

Vacuum headphones

This type of headset is also called earphones. Such devices last quite a long time if thoroughly cleaned regularly. This is especially important if you use white headphones, because dirt is much more visible on them.

Clean vacuum headphones not difficult. The best remedy To remove dirt in this case, use ordinary nail polish remover. You need to take one that does not contain acetone. Rubber or silicone pads are wiped with a cotton pad soaked in hydrogen peroxide. The removable mesh must be removed and immersed in peroxide until the reaction stops occurring. After the cleaning procedure, all parts should be laid out until completely dry.

Using clothespins you can securely fix the headphones

How to clean iPhone headphones

The most common non-separable headset is EarPods from Apple. The developers released durable devices that are resistant to any mechanical stress, but did not provide various latches, so cleaning iPhone headphones is much more difficult. To remove contaminants from such products, you will have to open the case, and when reassembling, use glue.

You will need a scalpel to disassemble the ear tips. They are carefully passed along the seam, dividing the headphones into two parts. On one side there will be a speaker with a circuit, and on the other there will be a thin mesh through which the sound passes. In the same way, you can disassemble the remote control for the headset. Instead of a scalpel, you can use a guitar pick.

How to properly disassemble headphones

Largest quantity dirt accumulates on the mesh. You can clean earwax from headphones (Iphone Airpods) with alcohol, vodka or hydrogen peroxide, but before doing this, remove large accumulations of dirt using a toothpick. The speaker grilles are wiped with a cotton swab dipped in an alcohol solution.

Using the tips listed above, cleaning your iPhone AirPods is easy and can be done in just 10-15 minutes. If you perform such procedures at least once a month, the service life of the device will increase significantly.

How to clean cords and connectors

The easiest thing to do when tidying up your headset is cleaning the wire. Wet wipes are suitable for this. Difficult stains are removed with a sponge soaked in alcohol or nail polish remover. Stubborn stains are much more difficult to clean, so you should use a sponge or toothbrush.

Important: Care should be taken when cleaning the connector contact, because it depends on its performance whether the music will sound or not. To prevent the plug from becoming covered with dirt or dust, you need to wipe it ammonia, and after drying - with a cloth dampened warm water. Thanks to this method, the port will become much less clogged.

Below are two proven methods on how to clean the headphone jack on your phone. These methods are suitable for iPhone 5S and any other models:

A piece of cotton wool soaked in alcohol and carefully wrung out is wrapped around a match or toothpick. Then the resulting tool is carefully inserted into input 3.5. The manipulation is repeated until the cotton wool is clean.
For the second option, you will need a simple cotton pad. It is divided into two, and then the stronger part is poured with alcohol and squeezed out. Next, the plug is wrapped with a cotton pad so that outer side was on top, and carefully inserted into the socket. The manipulations are repeated until the cotton pad removed from the hole remains clean.

Earbuds, on-ear and wireless headphones – all models need cleaning. Above were the simplest and most simple ways care But in order not to damage the product, you should use additional tips:

Before you start working, you need to read the instructions for caring for the accessory on the manufacturer’s website.
If you use nail polish remover to clean your headset, you need to choose one that does not contain acetone.
After the device is in order, it should be dried thoroughly. For this purpose, it is best to take a hairdryer.

Useful: Using alcohol or hydrogen peroxide for cleaning, you can not only clean the device, but also disinfect it.

Thanks to the simplest methods and tips, getting your headphones in order will not be difficult. If you cannot clean the device yourself, you can contact a service center.

Long-term use of headphones leads to their contamination with sweat and earwax. If more than one person uses headphones, they can become a carrier of bacteria, which subsequently provoke the development of otitis media. In addition, earwax, grease and dust that get into the speakers negatively affect the sound quality. You can clean the device with alcohol, hydrogen peroxide, or soap solution. Depending on the product model, experts suggest various ways cleaning it.

Apple EarPods

The main feature of the EarPods, which is important to know about before you start cleaning them, is that they are produced without removable tips. Therefore, owners of iPhone 4, iPhone 5, iPhone 5s, iPhone 6, iPhone 7 phone models should be especially careful in cleaning the product from accumulated dirt.

Under no circumstances should the earphone be completely lowered into aqueous solution. This will damage the wiring.

In order to clean your headphones, you must first prepare toothpicks, alcohol or vodka, cotton wool and cotton swabs.

Step by step guide:

1. Use a toothpick to clean the dirt that has formed on the headphone mesh. This should be done carefully so as not to damage the equipment.
2. Lightly moisten a cotton swab in alcohol and wipe the surface of the mesh and speaker grilles. It is important to ensure that liquid does not get inside.
3. Wipe the headphones with dry cotton so that there are no wet marks left on them.

Sennheiser

All earbuds from the German manufacturer Sennheiser have removable mesh, which greatly simplifies the process of cleaning them.

Removable mesh for SENNHEISER headphones

Cleaning the product is carried out in two stages:

1. Remove the mesh using tweezers and place them in a small container with alcohol for 5-10 seconds. This time is enough to carry out general disinfection and remove coarse dirt.
2. Wipe the device with cotton wool soaked in hydrogen peroxide. After this they should dry. This will take 10–15 minutes.

After cleaning the mesh, you need to carefully put it back in place.